Range of Products

Best Sellers

1. SNAP PAC R-series Automation Controller (Ref: SNAP-PAC-R1)
2. 6" 256 Colour TFT (Ref: HMI520T)
3. SNAP PAC S-series Automation Controller (Ref: SNAP-PAC-S1)
4. PAC Project Pro (Ref: PACPROJECTPRO)

New Products

1. SNAP PAC R-series Automation Controller (Ref: SNAP-PAC-R1)

MODBUS Analogue IO Modules

Product Portfolio | Acromag | MODBUS RTU IO | MODBUS Analogue IO Modules

913MB Ref: 565

DC Current Input Module with Limit Alarms
INPUT: 4 channels, 0 to 20mA DC input range (0 to 20A AC with AC sensor option)
ALARMS: 4 channels, open drain MOSFETS (1A DC loads, 0 to 35V DC)
POWER: 10 to 36V DC, 24V AC
NETWORK COMMUNICATION: Modbus RTU high-speed RS-485

This signal conditioner is a four-channel analog input module with four discrete outputs. It provides isolation between input, output, power, and network circuits. Network communication adheres to the industry-standard RS-485 Modbus RTU protocol. AC and DC power sources are supported with nonpolarized, diode-coupled terminals.

The inputs accommodate wide DC voltage or current ranges. Flexible discrete outputs operate as alarms or on/off controllers. As limit alarms, each discrete output can be configured with high and/or low setpoints exclusively tied to an analog input channel. Alarm trips function without host communication enabling low-cost stand-alone alarms, as well as local backup for the primary control system. Otherwise, on/off control is based on commands issued by the host system.

Combining flexible transmitter functions, mixed signal I/O, alarm support, and a network interface in a single package, makes this instrument extremely powerful. Multi-channel design adds cost-efficiency and allows high-density mounting. Plus, safe, rugged construction makes these modules reliable for use in both control room and distributed field I/O applications.

Datasheet

917MB Ref: 567

DC Current Output Module with Discrete Outputs
ANALOG OUTPUT: 4 channels, 0 to 20mA output range
DISCRETE OUTPUT: 4 channels, open drain MOSFETS (1A DC loads, 0 to 35V DC)
POWER: 10 to 36V DC, 24V AC
NETWORK COMMUNICATION: Modbus RTU high-speed RS-485

These modules drive four analog output channels and also feature four discrete outputs for on/off control. Isolation separates the output, power, and network circuits. Network communication adheres to the industry-standard RS-485 Modbus RTU protocol. AC and DC power sources are supported with nonpolarized, diode-coupled terminals.

The analog outputs generate a signal based on communication from the host. They accommodate wide DC voltage or current ranges.

Discrete outputs provide simple on/off switching capability for external devices.

Combining analog outputs, on/off controllers, and a network interface in a single package, makes this instrument extremely powerful. Multi-channel design adds cost-efficiency and allows high-density mounting. Plus, safe, rugged construction make it reliable for both control room and distributed field I/O use in a broad range of temperature control applications.

Datasheet

918MB Ref: 568

DC Voltage Output Module with Discrete Outputs
ANALOG OUTPUT: 4 channels, 0 to 10V DC output range
DISCRETE OUTPUT: 4 channels, open drain MOSFETS (1A DC loads, 0 to 35V DC)
POWER: 10 to 36V DC, 24V AC
NETWORK COMMUNICATION: Modbus RTU high-speed RS-485

These modules drive four analog output channels and also feature four discrete outputs for on/off control. Isolation separates the output, power, and network circuits. Network communication adheres to the industry-standard RS-485 Modbus RTU protocol. AC and DC power sources are supported with nonpolarized, diode-coupled terminals.

The analog outputs generate a signal based on communication from the host. They accommodate wide DC voltage or current ranges.

Discrete outputs provide simple on/off switching capability for external devices.

Combining analog outputs, on/off controllers, and a network interface in a single package, makes this instrument extremely powerful. Multi-channel design adds cost-efficiency and allows high-density mounting. Plus, safe, rugged construction make it reliable for both control room and distributed field I/O use in a broad range of temperature control applications.

Datasheet

924MB Ref: 569

Thermocouple/Millivolt Input Module with Limit Alarms
INPUT: 4 channels, thermocouple (types J, K, T, R, S, E, B, N) or millivolt (±100mV DC) input
ALARMS: 4 channels, open drain MOSFETS (1A DC loads, 0 to 35V DC)
POWER: 10 to 36V DC, 24V AC
NETWORK COMMUNICATION: Modbus-RTU high-speed RS-485

This signal conditioner is a four-channel analog input module with four discrete outputs. It filters and linearizes thermocouple inputs while providing isolation between input, output, power, and network circuits. Cold junction compensation and upscale/downscale sensor break detection are standard. AC and DC power sources are supported with nonpolarized, diode-coupled terminals.

The programmable inputs accommodate eight thermocouple types plus wide-range millivolt signals. Flexible discrete outputs operate as alarms or on/off controllers. As limit alarms, each discrete output can be configured with high and/or low setpoints exclusively tied to an analog input channel. Alarm trips function without host communication enabling low-cost stand-alone alarms as well as local backup for the primary control system. Otherwise, on/off control is based on commands issued by the host system.

Combining flexible transmitter functions, mixed signal I/O, alarm support, and a network interface in a single package, makes this instrument extremely powerful. Multi-channel design adds cost-efficiency and allows high-density mounting. Plus, safe, rugged construction makes these modules reliable for use in both control room and distributed field I/O applications.

Datasheet

932MB / 934MB Ref: 570

RTD/Resistance Input Module with Limit Alarms or Discrete Outputs
INPUT: 2 or 4 channels, RTD (100 ohm Pt, 120 ohm Ni, 10 ohm Cu) or resistance (0 to 500 ohms) input
DISCRETE OUTPUT: Solid-state relays, Form A, SPST-NO
POWER: 10 to 36V DC, 24V AC
NETWORK COMMUNICATION: Modbus-RTU high-speed RS-485

This signal conditioner is a dual or quad-channel analog input module with one discrete/relay output per input channel and a Modbus interface. It filters and linearizes RTD or resistance inputs while providing isolation between input, output, power, and network circuits. Lead wire compensation and pscale/downscale sensor break detection are standard. Low voltage AC and DC power sources are supported with nonpolarized, diode-coupled terminals.

The programmable inputs accommodate four RTD types plus wide-range resistance signals. Flexible discrete outputs operate as alarms or on/off controllers. As limit alarms, each discrete output can be configured with high and/or low setpoints exclusively tied to an analog input channel. Alarm trips function without host communication enabling low-cost stand-alone alarms as well as local backup for the primary control system. Otherwise, on/off control is based on commands issued by the host system.

Combining flexible transmitter functions, mixed signal I/O, alarm support, and a network interface in a single package, makes this instrument extremely powerful. Multi-channel design adds cost-efficiency and allows high-density mounting. Plus, safe, rugged construction makes these modules reliable for use in both control room and distributed field I/O applications.

Datasheet

Product Portfolio | Acromag | MODBUS RTU IO | MODBUS Analogue IO Modules

17 Beeston Court, Manor Park, Runcorn, Cheshire, WA7 1SS (T): 01928 571 977 (F): 01928 571 988

Order Summary

Items:
Value:

Contact Us

t:: 01928 571 977

f:: 01928 571 988

17 Beeston Court
Manor Park
Runcorn
Cheshire
WA7 1SS