Terminals

Product Portfolio | Opto 22 | Accessories |  Terminals

G70 TerminalG70 Terminal Ref: OptoTerminal-G70

OptoTerminal-G70 is an Ethernet-enabled, graphics-based operator interface for use with Opto 22 SNAP Ethernet I/O and SNAP Ultimate I/O systems.
The compact, mountable display terminal is used to send commands and receive real-time data from plant floor equipment and other real-world devices connected to Opto 22 hardware for the purposes of automation, data acquisition, remote monitoring, and control.
The industrially hardened OptoTerminal-G70 offers standard TCP/IP Ethernet connectivity, a color touch screen, and easy-to-use software, and provides a low-cost, compact, and durable operator interface for the plant floor and remote locations.
Recommended for use with the OptoTerminal-G70 is the OptoTermCable-G70, a power and serial cable that is convenient for programming the terminal on a desk or other temporary location.

Datasheet


Cable for G70Cable for G70 Ref: OptoTermCable-G70

OptoTermCable-G70 is a power adapter and serial cable used with Opto 22's OptoTerminal-G70 color touch-screen display terminal. The power adapter converts 120VAC/60Hz/26W to 12VDC @ 1000mA. Contact Opto 22 for other power options. This cable is convenient for programming OptoTerminal-G70 on a desk or location other than the final location where the terminal will be installed. (Typically a custom cable is used at the final installation site to match available power and equipment requirements.)

Datasheet


G75 TerminalG75 Terminal Ref: OptoTerminal-G75

OptoTerminal-G75 is an Ethernet-enabled, graphics-based operator interface for use with Opto 22 SNAP Ethernet I/O and SNAP Ultimate I/O systems. The mountable display terminal is used to send commands and receive real-time data from plant floor equipment and other real-world devices connected to Opto 22 hardware for the purposes of automation, data acquisition, remote monitoring, and control. The industrially hardened OptoTerminal-G75 offers standard TCP/IP Ethernet connectivity, an active-matrix LCD color touch screen, and easy-to-use software, and provides a durable operator interface for the plant floor and remote locations. Recommended for use with the OptoTerminal-G75 is the OptoTermCable-G75, a power and serial cable that is convenient for programming the terminal on a desk or other temporary location.

Datasheet


Cable for G75Cable for G75 Ref: OptoTermCable-G75

OptoTermCable-G75 is a power adapter and serial cable used with Opto 22's OptoTerminal-G75 color touch-screen display terminal. The power adapter converts 120VAC/60Hz/26W to 24VDC @ 1000mA. Contact Opto 22 for other power supply options. This cable is convenient for programming an OptoTerminal-G75 on a desk or location other than the final location where the terminal will be installed. (Typically a custom cable is used at the final installation site to match available power and equipment requirements.)

Datasheet


Product Portfolio | Opto 22 | Accessories |  Terminals

17 Beeston Court, Manor Park, Runcorn, Cheshire, WA7 1SS (T): 01928 571 977 (F): 01928 571 988

Order Summary

Items:
Value:


Contact Us

t:: 01928 571 977

f:: 01928 571 988

17 Beeston Court
Manor Park
Runcorn
Cheshire
WA7 1SS