Range of Products


Best Sellers

1. SNAP PAC R-series Automation Controller (Ref: SNAP-PAC-R1)
2. 4.3" 256 Colour TFT (Ref: HMI504T)
3. ELC-18DC-DA-R (Ref: ELC-18DC-DA-R)
4. 5.6" 256 Colour TFT (Ref: HMI520T)

New Products

1. SNAP PAC R-series Automation Controller (Ref: SNAP-PAC-R1)
2. 4.3" 65K Color TFT LCD Touchscreen (Ref: HMI5043N)
3. ELC-18DC-DA-R (Ref: ELC-18DC-DA-R)
4. SNAP PAC R-series Wired + Wireless Automation Controller (Ref: SNAP-PAC-R2-W)


ELC PLC Accessories

Automation Products | xLogic SuperRelay PLC |  ELC PLC Accessories

xLogicSoftxLogicSoft  New Ref: xLogicSoft

Features
  • FREE Windows based SuperRelay PLC configuration software
  • Function Block Programming
  • FREE upgrades to ALL future software releases
  • Library of pre-configured function blocks for ultra fast set-up
  • On-Line Monitor Feature
  • Off-Line Simulation Feature


Software

Quantity:  

ELC-RS485ELC-RS485  New Ref: ELC-RS485

RS485 Interface card which provides easy wiring for a MODBUS RTU RS485 network to be connected to the SuperRelay. (ELC-18 DC models ONLY).


Datasheet
To purchase online, please login or contact us to create an account

Quantity:  

ELC-RS232ELC-RS232  New Ref: ELC-RS232

Programming cable which uses the PC RS232 port as an interface to the SuperRelay PLC serial programming port.


Datasheet
To purchase online, please login or contact us to create an account

Quantity:  

ELC-EthernetELC-Ethernet  New Ref: ELC-Ethernet

Power supply

ELC-Ethernet-DC : Rated Voltage: 10 - 24 VDC
Speed: 10MB

The Ethernet module, used to connect xLogic SuperRelay CPU modules in different places to large Ethernet networks to build up a huge monitoring and control system.

If the application requires a system where more than one CPUmodule is needed and these CPU modules have to communicate with each other, then each CPU module will be connected via an Ethernet Module to the Ethernet network.

The project down-and upload to and from the CPU modules and the communication between the CPU modules happens over the Ethernet network.

NB: Either an Ethernet Module OR a SMS can be added to a PLC NOT BOTH!


Manual
To purchase online, please login or contact us to create an account

Quantity:  

ELC-SMS-D-RELC-SMS-D-R  New Ref: ELC-SMS-D-R

ELC-SMS-D-R module is a remote control and messaging system,also is an expansion module connected to ELC-18 CPU module, however, this SMS module is only applied to ELC-18 CPU range.

Six digital inputs and four relay outputs with alternating contacts are monitored by means of a SMS (Short Message System)via a mobile telephone network* (SIM card determines the provider).
Additional 10 message inputs and 10 message outputs are supplied in software through which you can switch the input status and get alarm messages by SMS, causeitisused as expansion module , the function blocks usually used in PLC would be used by ELC-SMS module to realize some complex control function by means of short messages.
The device’s own phone book saves up to 5 mobile phone numbers of the receivers. Each status change from “0”to “1” at the message output sends a pre-defined message by SMS to the selected receivers. The receivers are processed cyclically, according to the order chosen. The message inputs can be switched on and off by means of a pre-defined message by SMS.
In order to obtain an overview of the state of the installation, the input and output status can also be queried by SMS.

Programming of the ELC-SMS is carried out with the xLogicSoft. In this way the settings can be configured conveniently ,flexibly and easily.
*GSM network: 850MHz, 900MHz, 1800MHz, 1900MHz (quad-band GSM module inside).

NB: Either an Ethernet Module OR a SMS can be added to a PLC NOT BOTH!


Datasheet
To purchase online, please login or contact us to create an account

Quantity:  

ELC-USBELC-USB  New Ref: ELC-USB

Programming cable which uses the PC USB port as an interface to the SuperRelay PLC serial programming port.


Datasheet
To purchase online, please login or contact us to create an account

Quantity:  

ELC-COPIERELC-COPIER  New Ref: ELC-COPIER

ELC-COPIER is used to save user programs from a PC. The ELC-COPIER can then be used to download its program to ELC PLC CPU units without the need of a PC on site.


To purchase online, please login or contact us to create an account

Automation Products | xLogic SuperRelay PLC |  ELC PLC Accessories

1 Beeston Court, Manor Park, Runcorn, Cheshire, WA7 1SS (T): 01928 571 977 (F): 01928 571 988

Order Summary

Items:
Value:

Contact Us

t:: 01928 571 977

f:: 01928 571 988

1 Beeston Court
Manor Park
Runcorn
Cheshire
WA7 1SS


Subscribe to SDUKNews










* required

Email Marketing by VerticalResponse